Browse our AC-DC Power Supplies

Rack Mount / Hot Swap

Choose from our range of Rack Mount / Hot Swap AC-DC power supply products. Listed below are links to pages showing more information about each range. You can narrow your search by using our Quick Product Finder. Alternatively you can use the filtering drop down options above.

Pick a product below for more information about that range:

FPS

FPS

  • 1U Front End Power supply
  • Rack mount (Hot swap)
  • 864W to 1008W
  • 1 o/p
HFE

HFE

  • 1600-2500W 1U Hot Swap Front End Power supply
  • Rack mount (Hot swap)
  • 1584W to 2500W
  • 1 o/p
Product Name Power Range (W) Construction Outputs
FPS
1U Front End Power supplyRack mount (Hot swap)
864 1008 Rack mount (Hot swap) 1 o/p
HFE
1600-2500W 1U Hot Swap Front End Power supplyRack mount (Hot swap)
1584 2500 Rack mount (Hot swap) 1 o/p

Latest AC-DC Power Supplies »

CUS100ME

CUS100ME is a single output 2” x 4” AC/DC supply with IEC60601-1 3rd edition medical approval as well as IEC60950-1 and is available in four mechanical formats: Open pcb, pcb with baseplate, U channel and U channel with cover.
The power supply is rated at 100W maximum output power.
With baseplate and U channel conduction cooling assistance this rating can be achieved at up to 70°C ambient temperature and with forced air cooling of 1m/s operation up to 85°C ambient temperature is possible.
It meets class B levels for both conducted and radiated emi and is
compliant with EN60601-1-2:2015 Edition 4 immunity requirements.      
CUS100ME is suitable for both Class I and Class II installations, is available with 12V to 48V outputs and is ideal for medical and general applications that require silent operation with no fan noise.
Efficiency is up to 94%, and off load power consumption is less than 0.5W.
 

QS

The single output QS range of power supplies offers low audible noise (with a temperature controlled fan to reduce audible noise) with a selection of standby and control options including PMBus™. The range is supported by a 7 year warranty and covers output voltage from 12V up to 52.8V. 
Suitable for both medical and non-medical applications. The entire range has full medical isolation (1 x MoPP input to ground, 2 x MoPP input to output and 1 x MoPP output to ground) and either dual or single fusing available as options. The QS range operates from a universal AC input of 90 - 264V to meet a wide range of applications, including industrial, medical, test & measurement, broadcast, communications and renewable.

CUS200/LD

Designed for light industrial, LED signage, broadcast, IT, and test & measurement equipment, the CUS200LD can deliver up to 120W convection, 150W conduction cooled and 206W peak power. The series is available with nominal output voltages of 5V, 7.5V, 12V, 15V, 24V and 48Vdc.  The low 31mm height makes it suitable for mounting in LED displays.

CM4

The CM4 range is the world's first conduction cooled modular power supply with a conduction cooled rating of 600W and up to 750W peak power for 5 seconds with up to 4 programmable outputs. CM4 may also be configured as convection or forced air cooled. Combining a 4kVac (2 x MOPP) input-to-output isolation and an 1 x MOPP input-to-ground isolation, the CM4 is certified for for medical and industrial equipment. 5V / 1A standby output is standard on all models and all output modules are supplied with remote sense and remote on/off.
 

CSW65

The CSW65 series of industrial AC-DC power supplies are available in three package styles; U-channel, enclosed and DIN rail mounting.  The series can accept a wide 90 to 305Vac, making it suitable for use with 115, 230 and 277Vac nominal inputs. Output voltages range from 5 to 54V with output power levels of up to 65W. The CSW meets efficiency level VI and has a low off-load power consumption of <150mW.
 

Additional Products »

PAGE TOP